Raspberry Pi 5 HATs
If you think a project should be added here, please open an issue on GitHub to add it.
Categories
Production HATs
The following HATs are commercially available and can be purchased today.
| Picture | HAT |
|---|---|
|
52Pi 2.5G PCIe Network Adapter RTL8125BG 10/100/1000M/2.5G PCIe Ethernet for Raspberry Pi 5 |
|
52Pi NVDAC 52Pi's 2230/2242 NVMe and PCM5122 DAC HAT. |
|
52Pi NVDigi 52Pi's 2230/2242 NVMe and WM8804 Digi HAT. |
|
52Pi N04 M.2 2280 NVMe Top 52Pi's Longer NVMe HAT for 2230, 2242, 2260, or 2280 SSDs. |
|
52Pi N05 M.2 2242 NVMe Top 52Pi's Shorter NVMe HAT for 2230 or 2242 SSDs. |
|
52Pi PCIe x1 Slot HAT PCIe x1 open-ended slot atop the Pi 5. |
|
52Pi PD Power HAT 52Pi's PD Power HAT. |
|
GeeekPi P33 M.2 NVME M-Key PoE+ Hat M.2 NVMe and PoE+ HAT for Pi 5. |
|
Geekworm X1001 NVMe HAT A slim 2280 NVMe SSD HAT for Pi 5. |
|
Geekworm X1004 Dual M.2 2280 NVMe HAT A dual-2280 NVMe M.2 SSD HAT for Pi 5. |
|
Geekworm X1011 PCIe to Four M.2 NVMe HAT A quad NVMe M.2 SSD HAT for Pi 5. |
|
HackerGadgets PoE + NVMe HAT An NVMe HAT with PoE+ built-in which fits inside the Pi 5 case. |
|
Mcuzone MPW7 E-key WiFi 7 HAT A WiFi HAT with an E-Key M.2 slot for Pi 5. |
|
n|fuse PoE HAT with PCIe options PoE HATs with integrated mPCIe or M.2 slots. |
|
NVPI5-2242T NVMe HAT A shot NVMe SSD HAT Raspberry Pi 5. |
|
NVPI5-2280B NVMe Base PCBWay's long NVMe SSD Base board Raspberry Pi 5. |
|
Raspberry Pi NVMe HAT The official Pi HAT for M.2 2230 or 2240 NVMe SSDs. |
|
Pimoroni NVMe BASE NVMe Base for Raspberry Pi 5 |
|
Pineboards Hat AI! M.2 E-key PCIe slot HAT for the Pi 5. |
|
Pineboards HatAI! Dual Edge TPU A HAT which allows connecting Dual Edge Coral TPUs to the Pi 5. |
|
Pineboards HatDrive! Bottom A Pi HAT for a single M.2 2242 or 2280 NVMe SSD. |
|
Pineboards HatBRICK! Commander A HAT which allows connecting two devices to the Pi 5 PCIe Bus. |
|
Pineboards HatDrive! Dual NVMe A HAT which allows connecting two NVMe SSDs to the Pi 5 PCIe Bus. |
|
Pineboards HatDrive! Top A Pi HAT for a single M.2 2230 or 2242 NVMe SSD. |
|
Pineboards HatNET! 2.5G A 2.5 Gigabit network HAT for the Pi 5. |
|
Pineboards uPCIty Lite A PCIe adapter for testing full-size cards on Pi 5. |
|
Radxa Penta SATA HAT A Pi 5 HAT for up to 5 SATA SSDs or HDDs. |
|
Waveshare PoE HAT (F) for Pi 5 PoE HAT for powering Raspberry Pi 5 via Ethernet |
|
Waveshare PCIe to M.2 Adapter with PoE Function PoE HAT with included M.2 Adapter and 12V power header. |
|
WisdPi Raspberry Pi 5 5GbE PoE+ expansion board Raspberry Pi 5 5GbE PoE+ expansion board. |
Prototype or Non-Commercial HATs
The following HATs are either not yet commercially available or one-offs and might be licensed under an Open Hardware License, allowing you to build your own.
| Picture | HAT |
|---|---|
|
HackerGadgets NVMe HAT An NVMe HAT designed for maximum airflow and fitment inside the Pi 5 case. |
|
OCP-TAP TimeHAT V2 A HAT providing PTP PPS in and out via an Intel i226 NIC. |
|
OCP-TAP TimeHAT V1 A HAT providing PTP PPS in and out via an Intel i225 NIC. |
|
Pimoroni NVMe Base Duo Dual-NVMe Base for Raspberry Pi 5 |
|
Radxa Dual 2.5G Router HAT A Pi 5 HAT for 2 2.5G network interfaces, NVMe SSD, and an additional PCIe device. |
About
This project is maintained by Jeff Geerling. The Raspberry Pi is a product of Raspberry Pi Ltd.